6-7 Connecting to TVs or External Displays via HDMI
Connecting the Camera to a TV
Connect the camera using an HDMI cable.
1 After confi rming that the camera is off, connect it to the TV using an HDMI
cable.
• Use the supplied cable protector and cable clip to prevent damage to the connectors
when an HDMI cable is connected. g “Attaching Cable Protectors” (P. 29)
HDMI connector
HDMI cable (connects to TV
HDMI connector)
Type A
Type D
2 Switch the TV to HDMI input and turn the camera on.
• The TV will show the contents of the camera monitor. Press the q button to view
pictures.
• If [On] is selected for [HDMI Control] (P. 630), the camera monitor will turn off when an
HDMI cable is connected.
• For information on switching to HDMI input, see the manual provided with the TV.
• Depending on TV settings, the image may be cropped and some indicators may not be
visible.
• HDMI cannot be used while the camera is connected to a computer via USB.
• If [Record Mode] is selected for [n HDMI Output] (P. 432) > [Output Mode] in the n video
menu, the signal will be output at the current movie frame size. No image will be displayed if
the TV does not support the selected frame size.
• If [4K] or [C4K] is selected, 1080p priority format will be used during still photography.
629
EN
6