4-5 Customizing Camera Functions
Storage- and Deletion-Related Items
(Custom Menus Y and Z)
These menus contain items pertaining chiefl y to the storage and deletion of the
image data recorded with the camera.
Y Card Slot Selection (Card Slot Settings)
The camera has slots for two memory cards. Choose a role for the card in each slot.
For more information, see “2-3 Card-Related Settings” (P. 71) and “3-3 Card-
Related Settings” (P. 316).
K Save Settings
Choose how the camera saves photos when two memory cards are
inserted. Choose standard, overfl ow, split, or backup storage. You can
opt to record each picture twice, once to each memory card and with
each of the two copies in a different format, or to record pictures to only
one card at a time, switching to the remaining card automatically when
the fi rst card is full (P. 72).
K Save Slot
Choose the card used to record photos when two cards are inserted
(P. 74). This option is available when [y] (Standard) or [z] (Auto
Switch) is selected for [K Save Settings].
n Save Slot
Choose the card used to record movies when two cards are inserted
(P. 316).
q Slot
Choose the card used for playback when two memory cards are
inserted. Pressing the q button displays the images on the selected
card (P. 57, 302). This option is not available if [y] (Standard) or [z]
(Auto Switch) is selected for [K Save Settings].
Assign Save
Folder
Choose the folder used to store image data.
• This option is also available when only one card is inserted.
• This option applies to both photos and movies (P. 76, 319).
• The card used for playback or to record new photos and movies can be chosen by:
- Pressing the CARD button and then rotating the front or rear dial
- Holding the q button and rotating the front or rear dial
This does not change the option selected for [q Slot].
• The option selected for image quality may change if you switch cards by changing settings
or inserting or removing cards when [Dual Independent 1] or [Dual Independent 3] is
selected for [K Save Settings]. Check the option selected for image quality before shooting.
• Settings other than [n Save Slot] and [Assign Save Folder] can only be accessed in still
photography modes.
Y tab [Card Slot Settings] Choose an option Choose a setting
• When [z] (Auto Switch) is selected for [K Save Settings], the camera will automatically
switch between the last picture on the fi rst card and the fi rst picture on the second card.
• In n (movie) mode, the slot selected for [n Save Slot] also serves as the [q Slot].
547
EN
4
To Next Page
Loading...
Need help?
General
Weight and Dimensions
