4-5 Customizing Camera Functions
L Fine-Tuning Autofocus (AF Focus Adj.)
Fine-tune phase-detection autofocus. Focus can be fi ne-tuned by up to ±20 steps.
• This item is for still photography.
• Normally there is no need to fi ne-tune autofocus using this item. Fine-tuning focus may
prevent the camera focusing normally.
• Focus fi ne-tuning has no effect in [S-AF] and [S-AFb] modes.
Off Fine-tuning disabled.
Default Data Fine-tune focus for all lenses.
Lens Data
Save fi ne-tuning values on a lens-by-lens basis. The camera can store
fi ne-tuning values for up to 20 lenses. Focus for individual lenses can be
fi ne-tuned in specifi c areas of the frame. In the case of zoom lenses, separate
values can be stored for long and short focal lengths.
1 Highlight [AF Focus Adj.] in the L (AF/MF) menu
and press I on the arrow pad.
2 Highlight [Default Data] or [Lens Data] and press the
I button.
• If you selected [Default Data], proceed to Step 5.
• To disable fi ne-tuning, highlight [Off] and press the OK
button.
3 Highlight [Create Lens Data Set] and press the OK
button.
• You will be prompted to choose the area of the frame for
which focus will be fi ne-tuned.
4 Use the FGHI buttons to choose an area of the
frame and then press the OK button.
• With zoom lenses, you can press the INFO button to
choose between long (telephoto) and short (wide) focal
lengths.
492
EN
4
To Next Page
Loading...
