K 2-15 Flash Photography
Adjusting Flash Output (x)
Adjust fl ash output. Use this option to adjust fl ash level if the fl ash is too bright
even in auto mode or if the value selected by the camera leaves your subject
underexposed.
Flash compensation is available in modes other than [# Manual] (manual).
1 Highlight [x] in the LV super control panel.
Flash compensation
2 Highlight an option using the front dial.
3 Press the shutter button halfway to select the
highlighted option and exit the LV super control
panel.
• The fl ash compensation value selected with the camera is added to that selected with
compatible fl ash units.
259
EN
2
To Next Page
Loading...
