Olympus E-M1X - Pairing the Camera and Smartphone

6-2 Connecting to Smartphones via Wi-Fi
Pairing the Camera and Smartphone
Follow the steps below when connecting the devices for the fi rst time.
• Adjust pairing settings using OI.Share, not the settings app that is part of the smartphone
operating system.
1 Launch the copy of the dedicated OI.Share app
previously installed on your smartphone.
2 Press the MENU button on the camera to display
the camera menus.
3 Highlight [T Wi-Fi Connect] in the q playback
menu and press I on the arrow pad.
• [T Wi-Fi Connect] options will be displayed.
• This item is only available when [On] is selected for
[Wi-Fi/Bluetooth Settings] > [Availability] in the camera
e setup menu.
4 Highlight [Device Connection] using the FG
buttons and press the OK button.
• A pairing guide will be displayed in the camera monitor.
5 Press the OK button after reading each page of instructions.
• Stop when you reach the following display.
QR code
Wi-Fi SSID
Wi-Fi password
Bluetooth local name
Bluetooth passcode
• The display lists the Bluetooth local name and passcode, the Wi-Fi SSID and
password, and a QR code.
587 EN
6