Olympus E-M1X - Using the Olympus LS-100 IC Recorder

n 3-11 Audio Recording
Using the Olympus LS-100 IC Recorder
When recording audio with an Olympus LS-100 IC recorder, you can use camera
controls to record slate tones or to start and stop recording.
Connect the LS-100 using the USB cable and a third-party stereo mini-jack cable.
Use a “no resistance” cable.
• Additional information is available in the documentation provided with the LS-100. Be sure
the recorder fi rmware has been updated to the latest version.
1 Connect the IC recorder.
• When the LS-100 is connected via USB, a message will be displayed prompting you to
choose a connection type. Select [PCM Recorder].
• If no message is displayed, adjust menu settings as follows:
MENU button
G (custom menu) tab S tab [USB Mode] Select [Auto]
or [PCM Recorder]
USB adapter (supplied with
USB adapter (supplied with
LS-100)
LS-100)
USB cable (supplied with E-M1X)
Third-party stereo mini-jack cable
2 Adjust [PCM Recorder K Link] settings:
• MENU button n (video) menu [Movie K]
[On]
Press I on the arrow pad
[Camera Rec. Volume]: Select [Inoperative].
[Slate Tone]: Select [On].
[Synchronized R Rec.]:
Select [On].
After adjusting settings, check that [On] is selected for
[Movie K] and press the MENU button repeatedly to exit
the menus.
415 EN
3