5-1 Notes on Field Sensors
Before Using GPS (A-GPS Data)
Depending on the status of the camera and communication, it may take time
to acquire the position information. When the A-GPS is used, the position
determination time can be shortened from a few seconds to a few tens of seconds.
The A-GPS data can be updated using the smartphone app “OLYMPUS Image
Track” (OI.Track) or the PC software “OLYMPUS A-GPS Utility”.
Make sure that the camera date is set correctly.
• A-GPS data must be updated every 4 weeks. The position information may have changed
when time has elapsed after updating the data. Use as new A-GPS data as possible.
• The provision of A-GPS data may be terminated without prior notice.
Updating the A-GPS Data Using a Smartphone
Before update, install the smartphone app “OLYMPUS Image Track” (OI.Track) on
your smartphone. Refer to the URL below for details on how to update the A-GPS
data.
http://app.olympus-imaging.com/oitrack/
Adjust Wi-Fi settings on the camera and establish a connection to the smartphone
before proceeding (P. 584). Select [Update GPS Assist Data] in the OI.Track
settings dialog.
• If a connection error is displayed, you will need to re-establish the connection between the
camera and smartphone
Updating the A-GPS Data Using a PC
Download the OLYMPUS A-GPS Utility software from the URL below, and install it
on your PC.
http://sdl.olympus-imaging.com/agps/
Refer to “OLYMPUS A-GPS Utility Instruction Manual” on the website with above
URL for details on how to update the data.
• If you are using the GPS function for the fi rst time and the A-GPS has not been updated, or
if the function has not been used for a long time, it may take a few minutes for the position
measurement to end.
569
EN
5
To Next Page
Loading...
Need help?
General
Weight and Dimensions
