n 3-12 Customizing Camera Controls
Role Function
Preset MF (PreMF)
Toggle [n AF Mode] > [Preset MF] on or off (P. 357). Press the control
once to enable preset MF and again to restore the previous focus mode.
Alternatively, you can choose the [n AF Mode] by holding the control
and rotating a dial. You can press the button to toggle the focus mode
during recording. Focus-mode selection using custom controls is not
available when [mode2] is chosen for [n Fn Lever Function].
Lens Info Settings
(sLens)
Recall previously-saved lens data. Recall saved data for the current
lens after changing lenses or the like.
S-AF
Focus using [S-AF]. Press the control to focus. Focus will lock while the
control is pressed.
Flicker Scan
(P)
Press the control to select [On] for [n Flicker Scan]. Adjust shutter
speed until fl icker is no longer visible. Press the control again to view or
hide shooting information. Press and hold the control to exit. This option
is available when [S] or [M] is selected for [n Mode]. See page 374
for more on [n Flicker Scan].
Off The control is not used.
Access via the LV Super Control Panel
Select n (movie) mode before using the LV super control panel to access
[n Button Function]. In modes
P
,
A
,
S
,
M
, and
B
(still photography modes), the LV
super control panel can be used to access [K Button Function] (P. 463).
1 Highlight [n Button Function] in the LV super
control panel and press the OK button.
• [n Button Function] options will be displayed.
n button function
2 Highlight the desired control using FG on the
arrow pad and press the I button.
3 Highlight a function using the FG buttons and
press the OK button to assign it to the selected
control.
• Repeat Steps 2 and 3 to assign functions to additional
controls.
4 Press the shutter button halfway to exit the LV super
control panel.
421
EN
3
To Next Page
Loading...
Need help?
General
Weight and Dimensions
