4-3 Customizing Buttons and Dials
Customizing the Fn Lever
(K Fn Lever Function)
Choose the role played by the Fn lever.
The Fn lever can be used to choose the roles of the front and rear dials or to recall
focus settings. It can also be used to select movie mode.
This setting takes effect in modes
P
,
A
,
S
,
M
, and
B
(still photography modes). The
option selected using [n Fn Lever Function] in the n video menu take effect in n
(movie) mode (P. 426).
mode1
Switch the functions of the front and rear dials. The functions for Positions 1 and 2
conform to the setting selected for [K Dial Function] (P. 473).
mode2
Switch between two groups of settings previously selected for [AF Mode], [AF Target
Mode], and [AF Target Point].
mode3
Toggle the shooting mode. You can switch to n (movie) mode without rotating the
mode dial.
Off Changing the position of the Fn lever has no effect.
• This option is not available when [Power 1] or [Power 2] is selected for [Fn Lever/Power
Lever] (P. 501) in G Custom Menu J.
1 Press the MENU button to display the menus.
2 Display G Custom Menu J (Button/Dial/Lever).
3 Highlight [K Fn Lever Function] using FG on the
arrow pad and press the I button.
4 Highlight the desired option using the FG buttons
and press the OK button.
• Pressing the I button when [mode2] is highlighted
displays focus settings, allowing you to choose the focus
settings selected with the Fn lever.
[AF Mode]: S-AF, C-AF, etc.
[AF Target Mode]: Single, all, etc.
[AF Target Point]: AF-target position
475
EN
4
To Next Page
Loading...
