4-5 Customizing Camera Functions
N [Sequential Low] Frame Rates and Burst Limits
(jL Settings)
Customize settings for [Sequential Low], [jL Anti-Shock r], [jL Silent s], and
[Pro Capture Low] modes.
• This item is for still photography. For more information, see the pages listed below.
j/j
(sequential low/anti-shock
sequential low)
Choose the frame rate and maximum number of shots (P. 155).
[Max fps]: 1–10 fps
[Frame Count Limiter]: 2–99, Off (no limit)
♥j
(silent sequential low)
Choose the frame rate and maximum number of shots (P. 155).
[Max fps]: 1–10, 15, or 18 fps
[Frame Count Limiter]: 2–99, Off (no limit)
J (Pro Capture low)
Choose the frame rate, the maximum number of shots taken
before the shutter button is pressed all the way down, and
maximum total shots (P. 168).
[Max fps]: 10, 15, or 18 fps
[Pre-shutter Frames]: 0–35
[Frame Count Limiter]: 0–99, Off (no limit)
Includes shots captured before recording
begins.
1 Highlight [jL Settings] in the N (Release/j/
Image Stabilizer) menu and press I on the arrow
pad.
2 Highlight an option using the FG buttons and
press the I button.
3 Highlight a sub-option using the FG buttons and
press the I button.
506
EN
4
To Next Page
Loading...
