4-5 Customizing Camera Functions
q Info: The Light Box Display
Compare two images by displaying them side-by-side and zooming in and out.
1 Press the q button.
• A picture will be displayed.
2019.04.01 12:30:00
15
×10
100
%
1
100-0015
4:3
HDR1
YFYF
48kHz
2 Press the INFO button repeatedly until the light box
is displayed.
• Two images will be displayed side-by-side.
• The picture that serves as the standard for comparison
(the “base picture”) is displayed on the left, the currently-
selected picture on the right.
3 Display the desired picture in the right box (the base
picture).
• Rotate the front dial until the desired picture is displayed
and press the OK button. The picture will appear in the
left box.
1615
100
%
1
1x
Base picture Current
picture
4 Choose the picture displayed in the right box.
• Rotate the front dial until the desired picture is displayed.
• To use the picture currently selected in the right box as
the base picture, press the OK button.
1615
100
%
1
1x
5 Press the Fn button to enable scrolling for the
current picture (the picture in the right box).
• Use the arrow pad or the multi selector to scroll the
current picture.
• Press the Fn button again to allow both pictures to be
scrolled simultaneously.
• Use the rear dial to zoom both pictures in or out.
1615
100
%
1
1x
1615
100
%
1
2x
• The current picture (in the right box) can be selected (v), protected, or marked for sharing
using the same operations as in single-frame playback.
518
EN
4
To Next Page
Loading...
