Olympus E-M1X - Page 606

6-3 Connecting to Computers via Wi-Fi
Enabling Camera Wi-Fi (Wi-Fi/Bluetooth Settings)
Before connecting to a network via Wi-Fi, you will need to enable Wi-Fi on the
camera. Note that this is not necessary at default settings, as Wi-Fi is enabled by
default. Proceed to page 607.
1 Press the MENU button to display the menus.
2 Highlight [Wi-Fi/Bluetooth Settings] in the e setup
menu and press I on the arrow pad.
3 Highlight [Availability] using the FG buttons and
press the I button.
4 Highlight [On] using the FG buttons and press the
OK button.
• [Wi-Fi/Bluetooth Settings] options will be displayed.
5 Press the MENU button repeatedly to exit the
menus.
606 EN
6