K 2-2 Shooting Settings
Using the Super Control/LV Super Control Panel
1 Press the OK button.
• If you press the button during live view, the LV super
control panel will be displayed in the monitor.
• The last setting used will be highlighted.
Cursor
2 Rotate the rear dial or tap to select
a setting in display.
• The selected setting will be
highlighted.
• You can also highlight settings using
the multi selector or arrow pad
(FGHI).
3 Rotate the front dial to change the
highlighted setting.
4 Press the shutter button halfway to accept current
settings and exit the LV super control panel.
• If you are using the super control panel, the cursor will
vanish and setting will end.
63
EN
2
To Next Page
Loading...
