Omnia Omnia.9 - Dual FM Configuration

CHAPTER 12
| 93
FM MENU EXPERT MODE
Dual FM Conguration
As if all of this capability was not impressive enough, with the optional “Dual FM” system configuration, the Omnia.9 can
provide independent processing for two unique FM stations.
When configured in this manner, the first FM processor (FM1) can provide processing for MPX (composite) only, L/R only,
or MPX+L/R together.
The second FM processor (FM2) can provide processing for MPX or L/R, but not for both together.
To configure your processing paths, go to Home/System/System Configuration/Processing paths.
Note that FM2 is an option and requires a license to be installed. You can check what licenses are installed on your unit by going
to Home/System/System Configuration/Upgrades.