Omnia Omnia.9 User Manual

CHAPTER 17
| 121
FM MENU METER OPTIONS
Meter Options Menu
Which meters are displayed in the Loudness Meter, Modulation Meter, and Modulation Numeric display windows are
determined by enabling or disabling available options in this menu.
Specifically:
♦ Program Input is available only in the in the Loudness Meter display.
♦ MPX Output, MPX Input 1, MPX Input 2, and Pre-emph Input are available in the Loudness Meter, Modulation Meter,
and Modulation Numeric displays.
♦ The MPX Power Meter, Peak Modulation Meter, Pilot Level Meter, and L/R Level Meter can be added to the Modulation
Meter display of any enabled MPX section, including MPX Output, MPX Input 1, and MPX Input 2.
♦ The MPX Power Numeric, Peak Modulation Numeric, Pilot Level Numeric, and L/R Level Numeric can be added to the
Modulation Numeric display of any enabled MPX section.
♦ The MPX Power Limit control sets the center of the MPX Power meter as well as whether the numeric readout is green
or red. This can be set differently from the MPX Power Limit control in the FM Processing section, and is available even
when Omnia.9 is not operating in MPX Power Mode, to provide a power measurement reference.
You can select as many or as few meter options as you need.

Omnia Omnia.9 Specifications

General

Brand	Omnia
Model	Omnia.9
Category	Recording Equipment
Language	English