CHAPTER 22
| 151
MONITOR OUTPUT MENU
Save Preset Menu
The Save Preset menu allows you to edit the name of or save over an existing preset.
♦ You can rename your current preset, regardless of whether or not is has been modified, by selecting the Edit Preset Name
button to bring up the on-screen keyboard. Type in the new name, select “OK”, and select Save Preset. The new preset
will now appear in the list.
♦ If your Current Preset has been modified, you also have the option to write over the existing preset without renaming it
by selecting Save Preset.
Main 1 Menu
The Main 1 menu contains the controls to set the output level of each Monitor Output, enable or disable any adjustable
parameters of each output, adjust the master gain level, adjust the left and right levels individually, solo an individual channel,
and set a high pass filter frequency for both the left and right channels.
♦ The Volume slider is a duplicate of the control found on the top of the Home screen and controls the output level to the
speaker or headphone output.
♦ The Bypass control enables or disables the parametric EQ, loudness contours, and high pass filters.
♦ The Lock control allows you to “lock down” all of the settings, including the patch points and the shortcut settings (such
as volume controls) at the top of the user interface. When locked, the controls will appear grayed out. This is especially
useful when the “Follow” control is enabled, as it prevents the selected patch point from being accidentally changed by
someone connected via a remote client.
♦ Imagine the surprise - not to mention confusion - this would cause the talent if, say, the Speaker Output, which normally
feeds the studio monitors with the low latency Studio output, got switched over to the HD-2 signal! And while we’re on
the subject, let us go on record as stating we do not endorse the idea of deliberately confusing the talent in this manner.
We’re just saying it could accidentally happen… Officially, we strongly recommend locking down any monitor output set
in active use.
To Next Page
Loading...
Need help?
General
