Omnia Omnia.9 User Manual

CHAPTER 20
| 133
STREAMING PROCESSING & ENCODING MENU
Processing Menu
The menus and controls in each of Omnia.9’s Streaming cores operate just as their counterparts in the HD Processing cores do,
which in turn are very similar to their counterparts in the FM processing section, each of which requires the operator to select
the About Preset tab to set the Adjustment Level between Basic, Intermediate or Expert modes. A detailed explanation of each
menu and control can be found and referenced in the FM Processing menu section of this manual. Controls unique to the HD
and Streaming sections are described in detail in the HD Processing menu section.
Streams Menu
This menu contains the controls necessary to set up and configure each of the enabled encoders and is where details of the
servers can be entered. Depending on the configuration of your Omnia.9, you may see 8, 6 or 4 encoders from the Streams
menu (refer to the System> System Configuration> Streams menu).

Omnia Omnia.9 Specifications

General

Brand	Omnia
Model	Omnia.9
Category	Recording Equipment
Language	English