OmniPod ENT450 - Basal and BG Settings

15
Initial PDM Setup 22 Initial PDM Setup
5. Press Next.
Note: Each time you turn on your PDM, you will see your username and your
selected screen color. Always identify the PDM as yours before using it.
Time and date
1. Press 12 / 24 hr to choose your preferred time display. For example, six hours
before midnight is:
• "6:00 PM" in 12 hr display
• "18:00" in 24 hr display
2. Use the Up/Down button to set the current time. Press Next.
3. Use the Up/Down button to set the current year, month, and day, pressing
Next between each setting.
4. Use the Up/Down button to choose your preferred date format. Press Next.
Basal and BG settings
Maximum Basal Rate
e Omnipod® System cannot deliver insulin at a basal rate that exceeds your
Maximum Basal Rate. You can adjust your Maximum Basal Rate later, if your
needs change.
1. Use the Up/Down button to choose a Maximum Basal Rate.
2. Press Next.
Dene a Basal Program
Your Basal Program denes your daily schedule for continuous insulin delivery.
e initial Basal Program is named “basal 1” and covers the full 24-hour period
from midnight to midnight. For an explanation of basal rates, basal segments and
Basal Programs, see page 138.
1. Use the Up/Down button to choose the basal rate for the time segment that
begins at midnight, then press Next.
Note: Initially , this time segment spans the 24-hour period from midnight
to midnight. You can segment the day into smaller periods of time in the
following steps. e rst segment of your Basal Program will always start at
midnight, and the nal segment will always end at midnight.