OmniPod ENT450 - Adding Time Segments

19
Initial PDM Setup 22 Initial PDM Setup
Correction Factor
Your Correction Factor denes how much one unit of insulin lowers your blood
glucose level. e Bolus Calculator uses the Correction Factor to calculate the
correction portion of a suggested bolus. You can create up to eight Correction
Factor segments per day.
1. Use the Up/Down button to enter the Correction Factor for the time segment
that starts at midnight. Your Correction Factor must be between 0.1 - 22.2
mmol/L. Press Next.
2. If desired, add more time segments to your Correction Factor prole (for
step-by-step instructions, see "Adding time segments" on page 19).
3. When the desired number of time segments exist, press Done.
4. Review the graph of your Correction Factor prole. Press List for a listing.
Press Graph to see the graph again.
5. Press Save to store the prole.
Adding time segments
1. Choose [add new] and press New.
Note: You can edit an existing segment by using the Up/Down
button to select a segment you wish to change and pressing Edit.
2. Enter a start time for the segment, then press Next.
3. Enter an end time for the segment, then press Next.
4. Enter a desired value for the segment, then press Enter. If setting a
Target BG value, enter a Correct Above value for the segment and
press Next.
5. To dene more time segments, return to step 1.