OmniPod ENT450 - Bolus Calculator Settings

17
Initial PDM Setup 22 Initial PDM Setup
Upper and lower limits for BG Goal Range
To dene the upper and lower limits of your BG Goal Range:
1. Use the Up/Down button to select the lower limit. Press Next.
2. Use the Up/Down button to select the upper limit. Press Next.
3. e next screen shows the selected upper and lower limits on a graph. Press
Save to accept the limits.
Caution: Check with your healthcare provider before adjusting these settings.
Bolus Calculator settings
e Bolus Calculator suggests boluses for you based on your current blood
glucose value and any food you are about to eat (see "e Bolus Calculator" on
page 144 for a detailed explanation).
Turn the Bolus Calculator on or o
1. Choose your Bolus Calculator setting:
• Select On to have the Bolus Calculator suggest boluses.
• Select O to do your own bolus calculations.
2. Press Next. If you turned the Bolus Calculator o, skip to "Other bolus
settings" on page 20.
Target BG and Correct Above values
e Bolus Calculator aims to bring your blood glucose to the Target BG value. You
can establish up to eight dierent blood glucose targets at dierent times of day.
For each Target BG that you set, you also set an accompanying Correct Above
value. e Correct Above value can range from the Target BG to 11.1 mmol/L.
e Bolus Calculator only suggests a correction bolus if your blood glucose is
above the Correct Above value.
1. Use the Up/Down button to enter the Target BG for the time segment that
starts at midnight. Initially, this segment covers 24 hours. Your Target BG
must be between 3.9 - 11.1 mmol/L. Press Next.
2. Use the Up/Down button to enter the Correct Above value for the segment
that starts at midnight. Press Next.
3. If desired, add more time segments to your Target BG prole (for step-by-
step instructions, see "Adding time segments" on page 19).