OmniPod ENT450 - Page 89

Adjusting Settings 7
74
7 Adjusting Settings
Edit or rename a carb preset
1. Home > Settings > Presets > Carb presets
2. Choose the category containing the preset you want to edit, then press Select.
3. Highlight the carb preset that you want to edit, then press Edit.
4. Press Edit again on the next screen.
5. To rename the preset, enter a new name (see "Entering text" on page 6).
6. Enter the grams of carbohydrates in the food, then press Next.
7. e next step is to, optionally, specify the grams of ber in the meal. Consult
with your healthcare provider about whether or not to enter the ber
information.
Note: If you enter the grams of ber into your carb preset, the Bolus
Calculator subtracts the grams of ber from the grams of carbohydrates.
Alternately, in step 6 above, you can enter the total grams of carbs minus the
ber yourself.
8. Press Next.
9. If you want, you can enter the grams of fat and protein and the total calories
in the meal. Press Next aer each entry. Entering these additional numbers is
optional.
10. Press Done to save the changes.
Delete a carb preset
1. Home > Settings > Presets > Carb presets
2. Choose the category containing the preset you want to edit, then press Select.
3. Highlight the carb preset that you want to edit, then press Edit.
4. Press Delete.
5. Press Delete again to permanently delete the carb preset.