Omron G5 Series - Page 412

8 Operation
8 - 16
OMNUC G5-series (Pulse-train Input Type) AC Servomotors and Servo Drives User’s Manual
Do not set.
Do not set.
Do not set.
• This indicates the software version of the Servo Drive. (Display example: Ver. 1.23)
Reserved
Encoder Position Error
Reserved
Reserved
P-N Voltage
Software Version
Encoder position error [encoder units]
Lower (L)
Higher (H)
Press to switch Lower (L) and Higher (H).
P-N Voltage [V] is displayed.