Omron G5 Series - Page 495

A - 29
Appendices
OMNUC G5-series (Pulse-train Input Type) AC Servomotors and Servo Drives User’s Manual
A-2 Parameter List
A
528 Default Display 29 Drive serial number 1 – 0 to 35 Required
30 Motor serial number –
31 Accumulative operation time h
32 Automatic motor recognition function –
33 Temperature information °C
35 Reserved (Do not set.) –
531 Reserved Do not set. 1 – 1 –
532 Command
Pulse Input
Maximum
Setting
Set the maximum command pulse input value. 4,000 kpps 250 to
4,000
Required
533 Pulse
Regeneration
Output Limit
Setting
Set whether to enable or disable the pulse
regeneration limit error detection function.
0 – 0 to 1 Required
0 Disabled
1 Enabled
535 Front Key
Protection
Setting
Set whether or not to restrict operations on the
front panel.
0 – 0 to 1
Required
0 Operations not restricted
1 Operations restricted
Pn
No.
Name Setting Description
Default
setting
Unit
Setting
range
Cycle the
power
supply