HS-360X Handheld DPM Scanner User Manual 9-19
Symbologies
User-Programmable Supplementals
Supplemental 1: Parameter # 579
Supplemental 2: Parameter # 580
If you selected a Supplemental User-Programmable option from Decode UPC/EAN/JAN
Supplementals, select User-Programmable Supplemental 1 to set the 3-digit prefix.
Then select the 3 digits using the numeric programming symbols. Select
User-Programmable
Supplemental 2 to set a second 3-digit prefix. Then select the 3 digits using the numeric
programming symbols . The default is 000 (zeroes).
User-Programmable Supplemental 1
User-Programmable Supplemental 2
To Next Page
Loading...
