9-20 HS-360X Handheld DPM Scanner User Manual
UPC/EAN
UPC/EAN/JAN Supplemental Redundancy
Parameter # 80
If you selected Autodiscriminate UPC/EAN/JAN Supplementals, this option adjusts the
number of times to decode a symbol without supplementals before transmission. The
range is from two to thirty times. Five or above is recommended when decoding a mix of
UPC/EAN/JAN symbols with and without supplementals. The default is 10.
Scan the programming symbol below to set a decode redundancy value. Next, scan two
numeric programming symbols in Appendix H — Numeric Keyboard. Enter a leading
zero for single digit numbers.
UPC/EAN/JAN Supplemental
Redundancy
To Next Page
Loading...
