HS-360X Handheld DPM Scanner User Manual 4-41
Radio Communications
Unpairing
Unpair the scanner from the cradle or PC/host to make the cradle available for pairing with
another scanner. Scan the programming symbol below to disconnect the scanner from its
cradle/PC host.
An unpairing symbol is also included in the HS-360X Wireless Scanner Quick Start Guide.
Toggle Pairing
Parameter # 1322
If the scanner is configured for Toggle Pairing, scanning the Toggle Pairing symbol a second
time will unpair the scanner.
Unpairing
* Toggle Pairing Disable
(0)
Toggle Pairing Enable
(1)
To Next Page
Loading...
