5-40
Note 1. Use “during RUN” (set value: 1) or “zero speed“ (set value: 3) for the timing for
stoppingthemotorusingabrake.Tospecifyaprecisestoptiming,set“frequen-
cy detection 1” (set value: 4) or “frequency detection 2” (set value: 5), and set
the frequency detection level (n095).
Note 2. Set values 20(frequency referenceloss)and 21(Inverter overheating warning
oH3) are available for 5.5- and 7.5-kW Inverters only.
Basic Operation Chapter 5
To Next Page
Loading...
