2-18
D Selecting Sequence Input Method
·By using SW1, NPN or PNP input can be selected as shown below.
24 VDC
S1 to 7
S1 to 7
(Default setting)
SW1
SW1
(+/--10%)
D Selecting RS-422/485 Termination Resistance
·Terminationresistancecan be selected by settingpin1oftheSW2toON. Thedefault
setting for the pin is OFF.
Selects RS-422/485 termination resistance
Selects frequency reference input method
Design Chapter 2
To Next Page
Loading...
