Omron WS02-SIMC1-E - V1.9 REV 02-2009 User Manual

Examples of Serial Communications Debugging Section 5-5
134
7. Copy the data file created in procedure 6 in the input file (COM port name
In.txt).
8. Changing in the file update time causes automatic reception of data from
the input file.
9. Execute Step Run, etc. to confirm the process of data received.
10. Repeat the debugging procedures 7 to 9 depending on the contents of
serial input data.
Note
Escape sequences contained in the send/receive data are handled as ’\n’ (n is
a lower-case alphanumeric character.) in the file. For example, the delimiter
for Host Link is ’\r’.

Omron WS02-SIMC1-E - V1.9 REV 02-2009 Specifications

General

Brand	Omron
Model	WS02-SIMC1-E - V1.9 REV 02-2009
Category	Software
Language	English