Omron WS02-SIMC1-E - V1.9 REV 02-2009 User Manual

Network Communications Setting Section 6-2
140
Note
Set the Unit number so as not to overlap with the one of another CPU Bus
Unit. The Unit number of the Virtual Communications Unit is set to "15" in
default.
3. Press the [OK] button to return to the [Register PLC Unit] window and
register the Unit in the Unit Registration List.
4. Press the [OK] button to register the Network Communications Unit.
5. The Network Communications settings will be displayed in the [System
Status] | [Settings] | [Network Communications Settings] window.
6. Network Communications Settings Registration: Selecting the Network
Communications Unit to be set followed by clicking the [Edit] button will
display the [Register Network Communications] window.

Omron WS02-SIMC1-E - V1.9 REV 02-2009 Specifications

General

Brand	Omron
Model	WS02-SIMC1-E - V1.9 REV 02-2009
Category	Software
Language	English