I/O Memory Allocation Section 9-3
217
Address CS/CJ-series PLC CX-Simulator
Words Bits
Name
Function Settings Function Settings
A360 to
A391
A36001
to
A39115
Executed
FAL Number
Flags
The flag corresponding to the
specified FAL number will be
turned ON when FAL(006) is
executed. Bits A36001 to
A39115 correspond to FAL
numbers 001 to 511.
The flag will be turned OFF
when the error is cleared.
1: That FAL
was exe-
cuted
0: That FAL
wasn’t exe-
cuted
Same as
CS/CJ-series
PLC.
A38506 The system deleted the re-
mainder of an EM file memory
file that was being updated
when a power interruption oc-
curred.
1: File de-
leted
0: No files
deleted
Not used. A385
A38507
File Deleted
Flags
The system deleted the re-
mainder of a Memory Card file
that was being updated when a
power interruption occurred.
1: File de-
leted
0: No files
deleted
Not used.
A39204 RS-232C
Port Error
Flag
ON when an error has occurred
at the RS-232C port. (Not valid
in peripheral bus mode or NT
Link mode.)
1: Error
0: No error
Same as
CS/CJ-series
PLC.
A39205 RS-232C
Port Send
Ready Flag
(No-protocol
mode)
ON when the RS-232C port is
able to send data in no-protocol
mode.
1:
Able-to-
send
0: Un-
able-to-
send
Same as
CS/CJ-series
PLC.
A39206 RS-232C
Port Recep-
tion Com-
pleted Flag
(No-protocol
mode)
ON when the RS-232C port has
completed the reception in
no-protocol mode.
• When the number of bytes
was specified: ON when the
specified number of bytes is
received.
• When the end code was
specified: ON when the end
code is received or 256 bytes
are received.
1: Recep-
tion com-
pleted
0: Recep-
tion not
completed
Same as
CS/CJ-series
PLC.
A392
A39207 RS-232C
Port Recep-
tion Overflow
Flag
(No-protocol
mode)
ON when a data overflow oc-
curred during reception through
the RS-232C port in no-protocol
mode.
• When the number of bytes
was specified: ON when more
data is received after the recep-
tion was completed but before
RXD(235) was executed.
• When the end code was
specified: ON when more data is
received after the end code was
received but before RXD(235)
was executed. ON when 257
bytes are received before the
end code.
1: Overflow
0: No over-
flow
Same as
CS/CJ-series
PLC.
To Next Page
Loading...
