ix
New PLCs Supported
CX-Simulator version 1.7 supports the following new CPU Units.
Series CPU Unit model
CP
CP1H-XA@@@@-@
CP1H-X@@@@-@
CP1H-Y@@@@-@
NSJ
(Controller
Section)
M3D (Used for the NSJ5-TQ0@-M3D, NSJ5-SQ0@-M3D, and
NSJ8-TV0@-M3D)
Integrated Simulation with Screen Operations for Virtual PT
(Programmable Terminal)
The PLC-PT Integrated Simulation icon can be used to perform integrated
simulations using CX-Designer version 2.0 or higher and CX-Simulator ver-
sion 1.7 or higher. This enables debugging by linking user program execution
on a virtual PLC with the CX-Programmer/CX-Simulator with screen opera-
tions for a virtual PT using the CX-Designer’s Test Tool.
• Starting the CX-Simulator:
The CX-Simulator is started by selecting the PLC-PT Integrated Simulation
menu item from CX-Designer version 2.0 or higher. (The user program is
automatically transferred to the CX-Simulator when it starts.)
• Connecting the CX-Simulator to virtual PT screens:
Automatically executed.
Refer to the operation manual for CX-Designer version 2.0 or higher for de-
tails.
Version 1.8
The changes that have been made from version 1.7 to version 1.8 of the CX-Simulator to enable
support of new functions are explained here.
New PLCs Supported
CX-Simulator version 1.8 supports the following new CPU Units.
Series CPU Unit model
CP
CP1L-M@@@@-@
CP1L-L@@@@-@
CJ CJ1H-CPU67H-R/66H-R/65H-R/64H-R
Version 1.9
The changes that have been made from version 1.8 to version 1.9 of the CX-Simulator to enable
support of new functions are explained here.
New PLCs Supported
CX-Simulator version 1.9 supports the following new CPU Units.
Series CPU Unit model
CJ CJ2H-CPU68-EIP/67-EIP/66-EIP/65-EIP/64-EIP
Version 1.91
The changes that have been made from version 1.9 to version 1.91 of the CX-Simulator to enable
support of new functions are explained here.
New PLCs Supported
CX-Simulator version 1.91 supports the following new CPU Units.
Series CPU Unit model
CJ CJ2H-CPU68/67/66/65/64
To Next Page
Loading...
