Installing a DE2-24P Disk Shelf
a.
Position the front rail location pegs fully inside the appropriate holes in the
front of the rack.
The rail flange must be inside of the cabinet flange, and the rail label facing the inside of
the cabinet.
b.
Insert and tighten one screw through the front of the rack and into the top
hole in the rails.
c.
Adjust the rail lengths to fit, and position the rear rail location pegs in the
corresponding rear rack holes.
100 Oracle ZFS Storage Appliance Installation Guide, Release OS8.8.x • August 2021
To Next Page
Loading...
