Oracle ZFS User Manual

Performing Initial Configuration (CLI)
■
To change the root password, see “Changing a User Password (BUI)” in Oracle ZFS
Storage Appliance Administration Guide, Release OS8.8.x
Performing Initial Configuration (CLI)
Use this procedure, which is a step-by-step utility, to complete initial configuration of network
interfaces, the Domain Name Service (DNS), time settings, name services, directory services,
storage, and remote support on the appliance using the command line interface (CLI).
Note - If installing clustered controllers, it is strongly recommended that you use the BUI for
initial configuration, as described in “Performing Initial Configuration (BUI)” on page 241.
Each step begins by printing its help, which can be reprinted by typing help. Use the done
command to complete each step. In the examples, the existing settings (obtained from the
DHCP server) are checked and accepted by typing done. To customize them, enter each context
(datalinks, devices and interfaces) and type help to see available actions for that context.
Before You Begin
■
Ensure you have configured the system as described in “Configuring the
System” on page 238.
■
This procedure assumes you have just completed configuration of the network interface and
are using the same administrative client to access the CLI.
1.
Log in using the administrative password that you created during system
configuration.
hostname console login: root
Password:
To setup your system, you will be taken through a series of steps; as the setup
process advances to each step, the help message for that step will be
displayed.
Press any key to begin initial configuration ...
2.
Configure the appliance network interfaces.
For detailed information, see “Network Configuration” in Oracle ZFS Storage Appliance
Administration Guide, Release OS8.8.x.
Note - You can create a management interface now, or at another time using a task in
“Configuring Management Interfaces” in Oracle ZFS Storage Appliance Administration Guide,
Release OS8.8.x.
aksh: starting configuration with "net" ...
256 Oracle ZFS Storage Appliance Installation Guide, Release OS8.8.x • August 2021

Oracle ZFS Specifications

General

Category	Storage
Operating System	Oracle Solaris
Protocol Support	NFS, SMB, iSCSI, FC
Data Protection	Snapshots, Clones, Replication
Encryption	AES-256 encryption for data at rest
Integration	Oracle Database
RAID Levels	RAID-Z2, RAID-Z3
Data Deduplication	Yes
Data Integrity	Checksums
High Availability	Redundant hardware
Maximum Capacity	Petabytes
Management	Command-line interface (CLI)