EasyManuals Logo

Oracle ZFS User Manual

Oracle ZFS
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #144 background imageLoading...
Page #144 background image
Verifying Operation of ZS7-2 Slide-Rails and CMA
Note - The slide-rail latching bracket has a green release tab. This tab is used to release and
remove the latching bracket so that you can remove connector D.
11.
Gently tug on the four CMA connection points to ensure that the CMA
connectors are fully seated before you allow the CMA to hang by its own weight.
12.
Install and route cables to the controller, as required.
Verifying Operation of ZS7-2 Slide-Rails and CMA
Use the following procedure to verify the operation of the CMA and slide rails for a ZS7-2
controller.
Before You Begin
Ensure all rack anti-tilt devices are extended to prevent the rack from tipping forward when the
storage controller is extended from the rack.
1.
Slowly pull the storage controller out of the rack until the slide-rails reach their
stops.
2.
Inspect the attached cables for any binding or kinks.
3.
Verify that the CMA extends fully with the slide-rails.
144 Oracle ZFS Storage Appliance Installation Guide, Release OS8.8.x • August 2021

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oracle ZFS and is the answer not in the manual?

Oracle ZFS Specifications

General IconGeneral
CategoryStorage
Operating SystemOracle Solaris
Protocol SupportNFS, SMB, iSCSI, FC
Data ProtectionSnapshots, Clones, Replication
EncryptionAES-256 encryption for data at rest
IntegrationOracle Database
RAID LevelsRAID-Z2, RAID-Z3
Data DeduplicationYes
Data IntegrityChecksums
High AvailabilityRedundant hardware
Maximum CapacityPetabytes
ManagementCommand-line interface (CLI)

Related product manuals