Oracle ZFS User Manual

Installing a DE2-24C Disk Shelf
■
Square-hole unthreaded cabinet - No preparation.
■
Round-hole unthreaded cabinet - Remove the screws from each rail end and discard.
Locate the screws for round-hole cabinets and place aside.
■
Threaded cabinet - Remove screws and replace them in the opposite direction (from the
inside of the rail flange) so they act as location pins. Also remove the clip nut from each
front rail end and discard.
4.
Position the front of the rails inside the cabinet, with the rail flange inside of the
cabinet flange, and the rail label facing the inside of the cabinet.
■
Square-hole unthreaded cabinet - The screw heads fit inside the rack holes.
■
Round-hole unthreaded cabinet - Install two screws through the rack and into the front of
each rail. Do not install into the cage nut in the rack, or the clip nut on the rail.
■
Threaded cabinet - The location pins fit inside the rack holes.
5.
Adjust the rail lengths to fit.
106 Oracle ZFS Storage Appliance Installation Guide, Release OS8.8.x • August 2021

Oracle ZFS Specifications

General

Category	Storage
Operating System	Oracle Solaris
Protocol Support	NFS, SMB, iSCSI, FC
Data Protection	Snapshots, Clones, Replication
Encryption	AES-256 encryption for data at rest
Integration	Oracle Database
RAID Levels	RAID-Z2, RAID-Z3
Data Deduplication	Yes
Data Integrity	Checksums
High Availability	Redundant hardware
Maximum Capacity	Petabytes
Management	Command-line interface (CLI)