Oracle ZFS User Manual

Connecting Disk Shelf Cables
1.
Locate the appropriate cabling configuration for your system in “Getting Started
with Cabling” in Oracle ZFS Storage Appliance Cabling Guide.
■
“Cabling DE3-24 Disk Shelves to 4X4 Port SAS-3 HBAs” in Oracle ZFS Storage
Appliance Cabling Guide
■
“Cabling DE2-24 Disk Shelves to 4X4 Port SAS-2 HBAs” in Oracle ZFS Storage
Appliance Cabling Guide
■
“Cabling DE2-24 Disk Shelves to 2X4 Port SAS-2 HBAs” in Oracle ZFS Storage
Appliance Cabling Guide
■
“Cabling Sun Disk Shelves” in Oracle ZFS Storage Appliance Cabling Guide
■
“Cabling Mixed DE3-24 and DE2-24 Disk Shelves” in Oracle ZFS Storage Appliance
Cabling Guide
■
“Cabling Mixed DE2-24 and Sun Disk Shelves” in Oracle ZFS Storage Appliance Cabling
Guide
2.
Connect cables between disk shelves and between storage controller(s) and
disk shelves.
If clustered controllers, be sure to connect the cluster cables as described in “Connecting
Cluster Cables” on page 220.
Example 5
Disk Shelf Cabling Example
The following illustration shows the cable connections for two clustered Oracle ZFS Storage
ZS4-4 controllers and eight DE2-24C disk shelves. The controllers, as recommended, are
located in the middle of the cabinet.
For cabling diagrams of specific configurations, refer to “Getting Started with Cabling” in
Oracle ZFS Storage Appliance Cabling Guide.
Cabling the Appliance 229

Oracle ZFS Specifications

General

Category	Storage
Operating System	Oracle Solaris
Protocol Support	NFS, SMB, iSCSI, FC
Data Protection	Snapshots, Clones, Replication
Encryption	AES-256 encryption for data at rest
Integration	Oracle Database
RAID Levels	RAID-Z2, RAID-Z3
Data Deduplication	Yes
Data Integrity	Checksums
High Availability	Redundant hardware
Maximum Capacity	Petabytes
Management	Command-line interface (CLI)