Oracle ZFS User Manual

Performing Initial Configuration (BUI)
a.
Click CONFIGURE for the appropriate service, set its parameters, and click
APPLY.
b.
When the summary of Name Services settings is displayed, click COMMIT if
all settings are complete and correct. Otherwise, click CONFIGURE to adjust
the settings for a service.
11.
Configure storage pools and click COMMIT.
For detailed information, see “Configuring Storage” in Oracle ZFS Storage Appliance
Administration Guide, Release OS8.8.x.
12.
Perform one of the following steps:
■ To register your appliance for remote support, complete the fields and click
REGISTER.
Configuring the Appliance for the First Time 253

Oracle ZFS Specifications

General

Category	Storage
Operating System	Oracle Solaris
Protocol Support	NFS, SMB, iSCSI, FC
Data Protection	Snapshots, Clones, Replication
Encryption	AES-256 encryption for data at rest
Integration	Oracle Database
RAID Levels	RAID-Z2, RAID-Z3
Data Deduplication	Yes
Data Integrity	Checksums
High Availability	Redundant hardware
Maximum Capacity	Petabytes
Management	Command-line interface (CLI)