Panasonic CF-C1 Series

87
PC Card
 To remove the card
1 Disable the card function.
A Click on the notification area and then click .
B Select the card.
A Double-click on the notification area and select the card, then click [Stop].
 Follow the on-screen instructions. This step is not necessary when removing the card after turning off the
computer.
2 Remove the card.
<For CF-C1 Series>
A Push the eject button.
B Draw the card straight out.
<For CF-F9 Series>
A Raise the bent part of the eject button.
B Press the eject button so the card comes out of the slot.
C Draw the card straight out.
NOTE
 Check the card’s specification to prevent the total operating current from exceeding the allowable limit. Otherwise
malfunction may occur.
Allowable Current: 3.3 V: 400 mA, 5.0 V: 400 mA
 After repeating insertion and removal, some types of card will not be recognized. In this case, restart the computer.
 If the computer freezes after resuming from
sleep/ standby or hibernation, remove and reinsert
the card. If the problem persists, restart the computer.
Windows 7
Windows XP
<CF-C1 Series> <CF-F9 Series>
Windows 7
Windows XP