Panasonic CF-C1 Series

To Next Page

To Previous Page

PC Card

 When a card is inserted, power consumption increases. Remove the card when it is not in use, especially when

operating by battery power.

 To connect peripheral devices (SCSI, IEEE1394, etc.) using a PC Card, follow the steps below (one example).

A Connect the peripheral device to the card.

B Turn on the power of device.

C Insert the card until it securely fits in the slot.

 Some PC Cards may not be recognized correctly. In this case, refer to “A PC Card does not work” ( page 162).

Main Page

Reference Manual1
Illustrations and Terminology in this Reference Manual2
Sound and Video2
Read Me First2
Entering Hibernation Suddenly3
Using the Touch Pad4
Scroll5
Using the Touch Pad Utility6
Change the Settings for the Touch Pad Utility8
Using the Virtual Scrolling Function9
Handling the Touch Pad10
Digitizer / Multi Touch Operation11
Operation by Touching the Screen11
Touching with the Digitizer Pen11
To Right-Click12
Touching with Your Fingers13
Change the Settings for the Screen14
Calibration by an Administrator15
Calibrating the Screen15
Calibration by a Standard User16
Handling the Screen17
Handling the Digitizer Pen17
Suggestions about Cleaning the LCD Surface18
Tablet Buttons19
To Change the Tablet Button Functions19
To Change the Functions of the LCD Brightness Buttons20
To Change the Functions of the Input Panel/Rotation/User Buttons20
Display Rotation21
To Select the Angle and Rotate the Display21
Changing the Settings22
Key Combinations24
Hotkey Settings27
Starting the Software Keyboard28
Software Keyboard Menu29
Starting the Software Keyboard Using the Tablet Button30
Hand Writing Utility31
Dashboard33
Using Dashboard as an Application Launcher35
Launching an Application Program35
Specifying Usable Functions on Dashboard36
Changing Settings and Deleting Application Programs36
Battery Power37
Checking the Battery Status37
To Check the Remaining Battery Power on the Screen38
Сheck Remaining Battery Power/Time Using the Windows Battery Meter39
To Check the Remaining Battery Power Using the Battery Indicator40
To Check the Battery with Less Remaining Power41
To Check the Battery Charging Status Using the Indicators41
To Check the Remaining Battery Power Using the Dashboard42
Correcting the Battery Display (Battery Recalibration)43
Computer Behavior with Low Battery43
Switching between Long Battery Life and Extended Operating Time45
Switching the Battery’s Economy Mode (ECO)45
Replacing the Battery Pack47
Adding the Second Battery Pack49
Customizing the Power Setting50
Power Plan51
Switching the Power Plan52
Power Saving Functions52
Switching Power Plan Extension Utility Manually55
Customizing with Power Plan Extension Utility55
Using Power Saving Utility58
When Using this Computer with the Battery Pack Only58
Setup59
Setting Sleep/Standby or Hibernates60
Sleep/Standby or Hibernation Functions60
Starting up Your Computer Quickly60
Entering/Resuming from Sleep/Standby or Hibernation62
To Resume from Sleep/Standby or Hibernation64
Security Measures65
Setting the Supervisor Password/User Password65
Preventing Your Computer from Unauthorized Use66
Preventing Your Hard Disk Data from Being Read or Written66
CD/DVD Drive67
Drive Handling Care67
Disc Handling Care68
To Clean Discs69
How to Hold a Disc69
Turning On/Off the CD/DVD Drive70
When You Want to Minimize Power Consumption70
Turning on or off Immediately71
Turning off the Power Automatically after a Certain Period of Time72
Change the Time until the Power Turns off72
Disc Information73
Recommended Discs for Writing74
Using DVD Discs74
Region Code Setting74
Changing the Internal CD/DVD Drive Letter77
Power-Saving Mode77
Running Windvd78
If You Have Uninstalled Windvd Accidentally79
Use Windvd for Playing Back a DVD Video79
If the Video Skips During Windvd Playback80
DVD Discs Created Using a DVD Recorder80
Writing to CD/DVD81
Applicable Media81
Using Windows Feature81
Using Roxio Creator LJB81
Using DVD-RAM for Windows 782
When an External CD/DVD Drive Has Been Connected82
Logical Format Type83
Using DVD-RAM for Windows XP83
Writing to DVD-RAM83
Logical Format Method84
If You Have Uninstalled Roxio Creator LJB Accidentally85
PC Card86
Inserting/Removing the Card86
Smart Card89
Inserting/Removing the Smart Card89
Inserting/Removing the SD/SDHC Memory Card90
SD/SDHC Memory Card90
Expanding Memory92
Inserting the RAM Module94
Removing the RAM Module96
Port Replicator97
External Display98
Switching the Display Mode98
Using the [Screen Resolution] Screen99
Using Graphics Driver99
Using Extended Mode101
To Switch to the Extended Desktop101
Connecting/Removing USB Devices103
Fingerprint Reader105
Fingerprint’s Outline106
TPM Installation107
Fingerprint Utility Installation107
Security Functions107
User Fingerprint Enrollment108
TPM Fingerprint Utility Initialization108
More Advanced Security110
Backup111
Limitations in Use112
Handling & Maintenance112
Deleting (Initializing) Owner’s Data112
Disable Power-On Security113
Delete Fingerprint Data113
Uninstall Protector Suite113
Starting over114
Modem115
Connecting the Internal Modem with a Telephone Jack115
Ring Resume Function117
To Set the Time to Return the Computer to Sleep/Standby118
Lan119
Turn off Your Computer119
Connect the Cable119
Turn on the Computer119
Power on by Lan/Wake up from Wired LAN120
Enabling/Disabling the Wake up from Wired LAN Function121
Wireless Switch Utility122
Disabling/Enabling Wireless Communication122
The Wireless Switch122
The Wireless Switch Utility Icon123
To Enable or Disable Particular Wireless Devices123
To Change the Function of the Wireless Switch123
Wireless Connection Disable Utility124
To Check the Wireless Communication Status124
Installing the Utility124
Checking the Status of the Wireless Connection125
Status Indication125
Menu125
Wireless LAN126
Turning On/Off the Wireless LAN Communication127
Setting the Profiles127
Setting the Wireless LAN Access Point128
Setting the Wireless LAN Standard Ieee802.11A (802.11A)130
Bluetooth131
Fast User Switching Function132
Inserting/Removing the Hard Disk Drive133
Starting the Setup Utility135
Information Menu136
Main Menu137
Advanced Menu138
CPU Configuration138
Peripheral Configuration138
Table of Contents140
Boot Menu140
USB Floppy Disk *1141
Hard Disk141
CD/DVD Drive141
Lan141
USB Hard Disk141
USB CD/DVD Drive141
- Security Menu142
- Boot Prompt Configuration142
- Exit Menu143
- Icon Enlarger144
- Loupe Utility145
- Troubleshooting147
- Cannot Boot from a Floppy Disk147
- Windows Startup Is Slow147
- The Computer Does Not Enter Sleep/Standby or Hibernation148
- The Computer Does Not Power off (Windows Does Not Shut Down)148
- Problems with Operation During Use149
- The Computer Does Not Resume149
- Cannot Scroll with the Touch Pad149
- Some Applications May Not Work Properly150
- No Response150
- Cannot Play Movies with the Windows Media Player150
- To Increase the Lifetime of the Battery151
- The Battery Indicator Lights Red151
- The Battery Indicator Is Blinking/Flashing151
- Problems with Battery151
- Problems with Cursor152
- The Cursor Cannot be Controlled Properly152
- The Cursor Moves Randomly152
- The Cursor Cannot be Moved with a Connected Mouse152
- There Are Red, Green, or Blue Dots on the Screen, or Display Defects153
- Screen Is too Dark or too Bright153
- Problems with Display153
- There Is an Afterimage154
- The Screen Becomes Disordered154
- Switching between Internal and External Displays Does Not Work154
- Nothing Is Displayed on the Screen154
- LCD Brightness Changes When AC Adaptor Is Disconnected155
- Nothing Appears on the External Display, or the Display Is Not Correct155
- Takes Long Time to Display the [Power Option] Screen155
- The [Panasonic] Boot Screen Is Not Displayed on the External Display155
- Combined Key Operations with the Fn Key Do Not Work156
- Cannot Point the Correct Position Using the Included Digitizer Pen156
- Only Capital Letters Are Being Input156
- Problems with Input156
- Problems with Disk and Drive157
- When You Want to Use the Input Panel157
- Unable to Read/Write to the Hard Disk157
- Cannot Boot from Internal CD/DVD Drive157
- Cannot Play Back TV Programs Recorded on a Commercial DVD Recorder158
- The CD/DVD Drive Indicator Does Not Light/Blink158
- Disc Playback and Writing Is Not Possible158
- When a Disc Is Inserted, It Is Not Played Automatically159
- If the CD/DVD Drive Vibrates Excessively or Is Noisy159
- The CD/DVD Drive Cannot be Turned on or off159
- Problems with Sound160
- Cannot Eject Disc160
- The Sound Is Not Heard160
- To Change the Volume160
- Your Peripheral Does Not Work161
- The Sound Function Is Not Working161
- Clacking Sound Is Heard While Operating the Screen with Digitizer Pen161
- Problems with Peripherals161
- An Error Occurs While Installing the Driver162
- Device Not Operate Properly if a Different Mouse Driver Is Installed162
- A PC Card Does Not Work162
- Microsoft Windows Logo Authentication Is Not Obtained163
- To Check if the Additional RAM Module Has Been Installed Successfully163
- The Address Map for IRQ, I/O Port Address, Etc. Is Unclear163
- Problems with Fingerprint Reader164
- Sensor Does Not Work164
- User Cannot Use Enrolled Finger. (E.g. Injury)165
- TPM Failure165
- Replacing Sensor166
- Protector Suite Reinstallation166
- Accessing [File Safe] after Protector Suite Uninstallation166
- Accessing [File Safe] after Computer Crash166
- Unable to Connect to a Network167
- Cannot Check the Computer’s MAC Address167
- “Lift Finger” Is Displayed During Operation167
- Problems with General Network167
- Problems with Wireless LAN169
- Access Point Is Not Detected169
- Cannot Communicate with the Access Point169
- The Communications Speed Is Low170
- Communications with Access Point Are Cut off171
- Cannot Set Wireless LAN to [Enabled] or [Disabled]171
- Hardware that Can be Checked Using the PC-Diagnostic Utility172
- Hardware Diagnostics172
Lan172
- Regarding the PC-Diagnostic Utility173
- Running the Diagnostic Check173
- The Computer175
- Hard Disk Backup/Restore Function176
- Creating a Backup of the Hard Disk Data176
- Restoring the Hard Disk Data176
- Start up System Recovery Options177
- Hard Disk Data Erase Utility179
- Error Message181
- Intel Active Management Technology182
- Setting AMT Configuration182
- Installing the Driver184
- Release AMT Configuration185
- Check the Computer’s Usage Status186
- Running PC Information Viewer186
- Save Information to a File186
- Save a Copy of the Screen to a File187
- Confirm the Information on How to Use the Hard Disk188
- Enable the Automatic Display Function188
- PC Information Popup188
- Confirm Information on How to Use the Hard Disk189
- Change the Settings189
- Protecting Your Computer from Viruses191
- Technical Information192
- Network Connections and Communications Software192
- Computrace Software192
- About Windows-Related Files192

Panasonic CF-C1 Series

Table of Contents

Other manuals for Panasonic CF-C1 Series

Related product manuals