Panasonic FP0H - Page 137

9.1 PWM Output Function
9-5
 Example of program
The following sample shows the program for performing the PWM output with 10 kHz and the
duty ratio of 50% from CH0 (Y0).
CH No.0 PWM
FP0H PWM
K10000:10KHz
K500:50.0%
R0
HFFF0 MV DT0
R1
DT0F173 PWMH K0
（ ）
DF
K10000F1 DMV DT1
K500F0 MV DT3
REFERENCE
• For details of the allocations of I/O and flags, refer to "12.2.3 When Using
PWM Output Function".
• For details of the FPΣ mode, refer to "11. FPΣ Mode".