Panasonic FP0H

4.1 Confirming I/O Allocation
4-7
4.1.3 When Using PWM Output Function
• The following reserved areas are allocated to the PWM output and control active flag.
• Allocate them so that they do not overlap the I/O used for the pulse output function.
 Allocation of I/O signals
FP0H mode
Signal name
I/O number
CH0 CH1 CH2 CH3
PWM output
Y0 Y3 Y8 YB
Control active flag (BUSY)
R911C R911D R911E R911F
FPΣ mode
Signal name
I/O number
CH0
CH2
PWM output
Y0 Y3
Control active flag (BUSY)
R903A R903C
REFERENCE
For details of the FPΣ mode, refer to "11. FPΣ Mode".