Settings of Control Unit
4-10
4.2 Settings in Configurator PMX
4.2.1 Allocating Channels to be Used
Use the Configurator PMX to allocate used channels and applications. The following
procedure is explained on the condition that the FPWIN GR7 has already started.
1. Select “Options” > “Positioning Table Settings” from the menu bar.
”Configurator PMX” will be activated.
2. Select “Channel setting” > “Used channel setting” from the menu bar.
The “Used channel setting” dialog box appears.
3. Select the axes to be used and the usage, and press the [Yes] button.
When the setting is changed, a confirmation message box appears.
To Next Page
Loading...
