Specifications
12-2
12.1 Specifications
12.1.1 General Specifications
For details of the general specifications, refer to FP0H User’s Manual (Basic).
12.1.2 Performance Specifications
High-speed counter/Pulse output/PWM output specifications
Item
FP0H mode
FP
mode
High-speed
counter
Single-
phase
Max. 4 channels (CH0 to CH3)
Max. 100 kHz x 4
Max. 4 channels (CH0 to CH3)
Max. 100 kHz x 4
2-phase
Max. 2 channels (CH0, CH2)
Max. 50 kHz x 2
Max. 2 channels (CH0, CH2)
Max. 50 kHz x 2
Pulse
output
Single-
phase
Max. 4 channels (CH0 to 3)
Max. 100 kHz
Max. 2 channels (CH0, CH2)
Max. 100 kHz
Interpolation
Max. 2 channels (CH0, CH2)
Max. 100 kHz (Composite speed)
Max. 1 channel (CH0)
Max. 100 kHz (Composite speed)
PWM output
Max. 4 points (CH0 to CH3) Max. 2 points (CH0, CH2)
Output frequency: Max. 100 kHz
Duty ratio (0 to 100%, Resolution of 1000 or 100)
(Note) For details of combinations, refer to "1.2 Restrictions on Combinations and Functions".
To Next Page
Loading...
