Panasonic FP0H

High-speed Counter Function
10-14
10.3.4 Sample Program (Positioning Operation With Inverter: First Speed)
Counts the feedback signals from the encoder with the high-speed counter. The operation of
the inverter stops when the count value reaches 5000.
 Wiring example
 Operation chart
 I/O allocation table
I/O no. Description I/O no. Description
X0 Encoder input R100 Positioning operation is running.
X5 Operation start signal R101 Positioning operation start.
Y0 Inverter operation signal R102 Positioning done pulse
R9110 High-speed counter CH0 control flag