Panasonic FP0H

Specifications
12-10
12.3.2 Common area (Memory Area No. 0)
●: Available, -: Not available
Address
Name
Default
Description
R
W
0000 Axis setting H0
Stores used channels (axes) and usage methods.
Monitor using binary display.
bit no. Settings
0
Not use CH0 (0) / Use CH0 (1)
1
Not use CH1 (0) / Use CH1 (1)
2
Not use CH2 (0) / Use CH2 (1)
3 Not use CH3 (0) / Use CH3 (1)
4-7 Disable the setting
8
As interpolation axis,
Not use CH0/CH1 (0) / Use
CH0/CH1 (1)
9
As interpolation axis,
Not use CH2/CH3 (0) / Use
CH2/CH3
10-15
Disable the setting
 
0001
Positioning repeat count
(CH0)
K0
Stores the repeat count in decimal when using the
repeat control in the position control.
Set value Operation
0 or 1 Not repeat an operation.
2-254
Repeat an operation for a
specified number of times.
255 or
more
Repeat an operation infinitely.
 
0002
Positioning repeat count
(CH1)
K0
 
0003
Positioning repeat count
(CH2)
K0
 
0004
Positioning repeat count
(CH3)
K0  
0005
-0006
Reserved for system - - - -
0007
Error code
H0
Stores a generated positioning error code in Hex
format (hexadecimal) when using the pulse output
function (table setting mode).
The higher 8 bits indicate channel number.
The lower 8 bits indicate error code.

-
0008
-0029
Reserved for system
-
-
- -