Settings of Control Unit
4-12
4.2.2 Setting Parameters
Use the Configurator PMX to allocate the most fundamental parameters for positioning control,
such as the motor rotation direction, pulse output method (CW/CCW and Pulse/Sign), home
input, limit input logic, and positioning control. The following procedure is explained on the
condition that the Configurator PMX has already started.
1. Select “Channel setting” > “Parameter settings” from the menu bar.
The “Parameter settings” dialog box appears.
2. Make necessary parameter settings according to the application and press
the [OK] button.
The settings will be stored as part of positioning parameter data.
To Next Page
Loading...
