Panasonic FP0H - Page 61

5.3 Home Return
5-9
Name
Operation diagram
Operation and application
Home
position
method
 Moves the current position to the
home return direction, and stops at
the position where the leading
edge of the home input is detected.
This coordinate is set as the
starting point.
 When no home input exists in the
home return direction, the limit
input turns on and the operation
stops.
 This method is used for
performing the home return with
the home switch only. This method
is compatible with the F171
instruction of the existing model
FPΣ.
Data
set
method
 Performs the home return based
on the home coordinate values in
the axis setting area of positioning
memory.
 Performs the home return toward
the home coordinate on the
software.
 When the starting point is within
the limit switch, it cannot be
started.