43 .
System Programming
106
Station Hunting Type
Description
Selection
Used to
enable or disable hunting and set the Station Hunting type
for each extension group. There are four Station Hunting types
available: Circular, Termination, Voice Mail (VM), and Automated
Attendant (AA). If circular hunting is assigned for a group, all the
extensions in the group are hunted until an idle one is found. If
termination hunting is assigned, hunting stops at the extension
which has the largest jack number in the group. If VM hunting is
assigned, all the VM ports of an extension group are hunted until
an idle one is found to permit Voice Mail Service.
If AA
hunting is
assigned, all the AA ports of an extension group are hunted until an
idle one is found to permit AA Service.
l
Extension group number:
1 through 8, *
(*call extension
groups)
l
Disable
(no
hunting) /
Terminate
(termination) /
Circular / VM
(voice mail) /
AA
(automated attendant)
Default
All extension groups - Disable
Programming
1.
Enter 106.
Display:
Call Hunting
Press NEXT.
Display:
EXT GRP NO?->
Enter an extension
group number.
To enter extension group number 1, you can also press NEXT.
Display example: Groupl: Disable
Keep pressing
SELECT
until the desired selection is
displayed.
Press
STORE.
Conditions
2.
3.
4.
5.
.6.
7.
-
8.
To program another extension group, press
NEXT
or
PREV,
or
SELECT
and the desired
extension group number.
Repeat steps 4 through 6.
Press
END.
l
Program [602] “Extension Group~Assignment” is used to assign the
extension
group members.
l
The system supports a maximum of eight jacks (16 jacks during System
Connection
for
KX-TD1232)
for
connection to a Voice Processing
System as VM or
AA pons.
Feature References
Section 3, Features,
Station Hunting
Voice Mail Integration
System Programming
4-37
To Next Page
Loading...
