107
43
l
System Programming
System Password
Description
Assigns the password required for entering System Programming
mode and for maintenance from a personal computer.
Selection
Password: 4
through 7 digits
Default
1234
Programming
1.
Enter 107.
Display: System Password
Conditions
2. Press NEXT.
Display: Password:1234
3.
Enter a password.
To
change thecurrententry,
press
CLEAR
and the
new password.
4.
Press STORE.
5.
Press END.
l
The password can be from four to seven digits long. The valid numbers
are from 0
through
9.
l
If less than four digits are entered, they are not stored.
. You cannot leave the entry empty.
Feature References
Section 3, Features,
System Programming
and Diagnosis with Personal Computer
System Programming with Proprietary Telephone
--__ _ .._~
4-38
System Programming
---
-.__- .__ __
To Next Page
Loading...
